Performing a Normal (Soft) Reset on a iPAQ rx1950 / rx1955

A normal reset is sometimes referred to as a soft reset. A normal reset stops all running applications but does not erase any programs or saved data.

Caution be sure to save any unsaved data before performing a normal reset since a normal reset erases all unsaved data.

  1. Locate the Reset button on the side panel of the iPAQ Pocket PC.
  2. Insert the stylus into the the units Reset button. The iPAQ Pocket PC will then restart in approximately five seconds and display the Today screen.

Performing a Clean Reset on a iPAQ rx1950 / r1955

A clean reset clears all user-installed settings, programs, and data, and it restores your HP iPAQ to factory settings.

If you perform a clean reset, your HP iPAQ loses all data. Be sure to save any unsaved data within a running application before performing a clean reset.

  1. Press and hold the Calendar and iPAQ Wireless buttons.
  2. While holding down these buttons, use the stylus to lightly press the Reset button on the left side of the HP iPAQ for about two seconds.
  3. When the HP iPAQ screen begins to fade, release the Calendar and iPAQ Wireless buttons first, and then remove the stylus from the Reset button.
  4. Plug the device into the AC Adapter or press the Reset button again. The HP iPAQ then resets and powers on.


Page last modified on May 08, 2008, at 02:25 PM